Foam pre-filter that fits our 500-1100 performance air filter.

• Engineered to meet or exceed OE designs and withstand the extreme operating temperatures experienced during a powersports engine's combustion
• Iridium-enhanced 0.6mm finewire design for improved ignitability, faster fuel combustion and a more focused ignition versus standard plugs
• Up to 26 percent quicker starts compared to that of standard plugs and as much as 21 percent less hydrocarbon emissions than standard plugs, which promotes better fuel efficiency and horsepower

Small engine racing air filter for use in many applications including go karts, mini bikes and many other off road applications.
Aftermarket air filter for the Predator 212cc, Honda GX390, Clone engines when using our air filter adapters with 2 7/16" OD. This air filter is an aftermarket version of the K&N cotton gauze design. Be sure not to forget our air filter oils and cleaners to keep your air filter performing at its best.

Outerwears air pre-filter for our 500-1100 performance air filter.

Performance air filter that fits Predator 212cc, Clone and Big Block applications with an air filter adapter with 2 7/16" diameter adapter.

Aftermarket Walbro Round style fuel pump.  This is a pulse type fuel pump.  Has one inlet and one outlet.  Use this fuel pump on the Briggs & Stratton Animal, Predator 212cc, Clone 196cc and big block applications.

ARC Racing connecting rod bearing set for the Predator 212cc engine.

K&N Pre-Filter for 4" Tall Racing Style Air Filter

K&N Pre-Filter for 6" Tall Racing Air Filters

RLV clone, Honda GX160, GX200 and Predator 212cc Hemi kart racing header.

Mikuni OEM single outlet fuel pump.  Fits 1/4" id fuel line.

Exhaust header for Predator 212cc "Hemi" engine with CNC'd flange.

This is a u-weld it kit for you to build your own custom exhaust for your go kart. Kit comes with everything pictured here. All pipe is 1 1/4" OD. Exhaust flange fits Predator 212cc, GX160, GX200 and most clone 5.5HP or 6.5HP OHV engines.

This Kit includes:
1) 180 degree header
1) 90 Degree header
1) 45 Degree header
1) Straight header
1) Header Flange

Pro Velocity go kart performance header with 1/2" npt pipe thread on end of header for a muffler. Our Pro Velocity go kart header is TIG welded and manufactured in the U.S.. Our header is 1" O.D. and will fit the Predator 212cc Hemi engine or Clone / Honda GX160 and GX200 engine.

Go Kart exhaust header for the Predator 212cc "Hemi" engine.  Our header along with our air filter and jet upgrades will really wake up that little engine.

New Tillotson Clone Carbs in stock and have been approved by AKRA for 2017 (NKA & WKA Pending). These are basically blue printed OEM carbs ready for stock racing with all the important measurements right up to stock legal specs. The main jet is .037 with the pilot jet at .026. Bore size is .6135.

• The intake and exhaust lobes allow the CL-2 to run at higher RPMs before the engine goes into uncontrolled valve float.
• The DynoCams CL-2 is legal for the current profile rules for stock classes.
• The lobes are hardened for extra durability, extending the life of this cam.

Specs

Profile

Bullfrog Performance Products Air Filter and Carb Jet kit upgrade for the Predator 212cc Harbor Freight engine. Increase air flow and give your engine the proper amount of fuel flow by using our air filter and carburetor jet upgrade kit.
Our kit comes with the following components:

• K&N style performance air filter
• Foam pre-filter
• Radiused air filter adapter
• Choke hold
• Main jet
• Custom emulsion tube